Remove all the protective films
Please make sure to remove all the protective films (both on the front and back)! On the front - a small sticker at the top right corner. On the back - the blue film.
Domus Go Portable Stand
This Assembly Guide includes instructions for Domus Go 580W. Please keep in mind that Domus Go can be mounted only horizontally to the Portable Stand. Please do not try to mount it vertically to avoid any damage to the product and yourself. In case of a vertical mounting, the Portable Stand can be unstable.
Heater Mounting brackets
The mounting brackets are attached to the Domus panel to its back part.
Portable Stand Mounting Rails
The mounting rails for all heaters of Domus Go model are pre-assembled and are ready to be attached to the panel.
In terms of positioning of the heater in the heated room/area, the best is to keep close to the main area where you spend most of the time.
Indeed, overtime the infrared waves will reach all surfaces providing an even temperature, but you will still feel more heat close to the heater.
Portable Stand Parts
There are only 4 parts to assemble our Innovative Tripod. No equipment or screwdriver needed.
Power source
Plug it in
If you want simply plug the heater in a socket, please make sure the socket is located nearby or you use a proper quality socket-extension. By default the electrical cord length is 1.9m. You can cut it and extend if needed.
Use this method for a simple on/off usage or with one of our plug-in thermostats.
Thermostat (if you order one)
This Assembly Guide does not include details to install and setup our thermostats. Please check the product page to find the right Installation Guide.
Before you choose the place to keep the Domus Go heater, please keep in mind that in case you want to use the heater with one of our plug-in thermostat, you should position a chosen thermostat not too far from the panel. However, you can always use cord extension in case of lack of sockets in the heated area.
This is important in order to minimise the difference between the real ambient temperature and the one which will be displayed on the thermostat. Thermostat allows you to have manual, app, smart and voice (Alexa, Google Home) controls over the heater.
ASSEMBLY THE STAND AND HEATER
1. Portable stand assembly
Insert the main leg into the body of the stand as shown on the illustration.
The IR heater Domus is safe to touch, however we always recommend to keep at least 10-30cm from the nearest furniture/curtain or interior object for the safety reasons.
You are responsible of choosing the appropriate operation position.
2. Attach the wheels
Screw each wheel into the stand body as shown on the illustration.
3. Attach the rails to the stand
Attach the rails to the leg as show on the illustration.
Attach the rails to the brackets on the back side of the Domus panel. The screws are now screwed onto the rails and must be inserted into the rails as shown on the illustration, lifted upwards and moved to the left or right to securely fix rails to avoid falling down.
Please pay attention to the rails. They are different. The one, that you opened during the previous step, must be on the bottom part of the panel (when it is mounted to the tripod).
This is required because another rail (which cannot be opened) will secure the position of the panel on the tripod.
4. Mount the panel to the Portable Stand
This action is recommended to perform with a help of a second person. The weight of the panel is 8 kg.
Mount the panel to the rails as shown on the illustration. The screws must be inserted into the brackets of the panel as shown on the illustration, lifted upwards and moved to the left or right to securely fix rails to avoid falling down.
5. Cord safety and appearance
6. Plug the panel
Plug the panel Domus in to start using it. If you order the heater with a plug-in thermostat, you should plug an electrical cord of a panel in a thermostat.
IR Panels Domus Go
The Innovative Far Infrared Heater for an efficient and comfortable indoor heating
Compatible Thermostats
The Far infrared Panel Heater Domus can be used together with any of our smart thermostats. Both plug-in (for a socket) and mains-powered (for a professional installation) ones.
