Discover how our infrared heaters and saunas create comfortable homes and private wellness spaces across Spain and Portugal
Based on 900+ reviews
In early 2024, homeowner Honda Gitas contacted Royal Infrared Heating® for help heating a recently purchased property near Murcia. Poor insulation made the home uncomfortable during colder months and difficult to heat efficiently.
The property previously relied mainly on air conditioning for warmth, resulting in high electricity bills without providing consistent comfort. A more efficient and practical heating solution was needed.
Royal Infrared Heating® recommended a tailored system for the open-plan living area, kitchen, hallway and bedroom.
For the approximately 40m² open-plan area, the following products were installed:
1 × Domus 900W panel
1 × Domus 580W panel
1 × Repulsus 350W mirror heater for the kitchen
The Domus panels provide the main source of warmth, while the Repulsus mirror heater adds targeted heat and a practical mirror feature to the kitchen.
A further Domus 580W panel was installed above the bed to provide direct, comfortable warmth in the bedroom.
The full property setup included:
1 × Domus 900W panel
2 × Domus 580W panels
1 × Repulsus 350W mirror heater
Depending on the room layout, insulation and design preferences, the Domus 900W panel could be replaced with:
2 × Domus 580W panels
or
1 × Domus 580W panel and 1 × Repulsus 350W mirror heater
These alternatives provide greater flexibility for open-plan areas, larger rooms and spaces requiring more evenly distributed heat.
The installation was completed by electricians near Murcia at an approximate cost of €30–€40 per panel. The complete installation took around 2–3 hours.
All panels were mounted neatly in the selected locations, and the process was quick, clean and straightforward.
Following the installation, the property felt warmer and more comfortable. The infrared heating system provided steady, energy-efficient warmth while reducing reliance on air conditioning.
The combination of Domus panels and the Repulsus mirror heater delivered targeted heat where it was needed most while maintaining a clean, modern interior.
Honda now enjoys a warmer and more comfortable home with a heating system that is easier to manage and more cost-effective during winter.
In Rojales, Alicante province, the owners of a two-storey townhouse wanted an efficient and modern heating solution for the main areas of their home. The property required heating across several connected spaces, including the living area, kitchen, stairs and landing. The goal was to create even warmth throughout the home while keeping the installation clean, discreet and easy to control. Royal Infrared Heating® recommended a tailored setup using Domus far infrared panel heaters paired with Poer 26 WiFi thermostats.
The heating system was designed around the layout of the townhouse, with each key area receiving its own infrared panel and smart control. For the living area of approximately 35m², the following products were installed: 2 x Domus 900W panels 2 x Poer 26 WiFi thermostats The two panels were placed in opposite corners to help distribute warmth evenly across the room. For the kitchen of approximately 15m², the following was installed: 1 x Domus 900W panel 1 x Poer 26 WiFi thermostat The panel was mounted between the door and window to provide strong heat coverage in the kitchen area. For the stairs and landing of approximately 13m², the following was installed: 1 x Domus 900W panel 1 x Poer 26 WiFi thermostat This panel was positioned opposite the stairs to help warm both the stairwell and landing.
All wiring was concealed during installation, giving the finished setup a clean and modern appearance. The Domus panels were mounted neatly in each area, while the Poer 26 WiFi thermostats allowed each space to be controlled separately for better comfort and efficiency.
The homeowners now enjoy even, comfortable and energy-efficient warmth across the main areas of their townhouse. The combination of Domus infrared panels and WiFi thermostats makes it simple to manage the temperature in each zone, whether at home or remotely. The result is a clean, cost-effective and practical heating solution that improved comfort throughout the property and exceeded the homeowners’ expectations.
Si quieres, puedo adaptarlo a formato web, SEO, catálogo, ficha técnica o estilo comercial.
This townhouse, with an open-plan living area, had previously been used mainly as a holiday home. After the COVID period, the owners decided to move to Spain permanently and needed a heating system suitable for everyday living. The existing air conditioning system was not ideal for permanent use. It consumed too much electricity and did not provide the comfortable, efficient warmth the homeowners wanted. They contacted Royal Infrared Heating® for a modern, energy-efficient heating solution that could warm the main living areas while giving them easy control in each zone.
Royal Infrared Heating® recommended a tailored setup using 3 Domus far infrared panels, each connected to a mains-powered Poer 26 WiFi thermostat. This allowed the homeowners to control each area separately, set schedules and manage the temperature more efficiently.
For the main living area, the following products were installed: 1 x Domus 900W panel 1 x Poer 26 WiFi thermostat The Domus 900W panel was installed in the centre of the main wall, approximately one metre above the floor. This position helped maximise heat distribution across the living space. The thermostat was installed next to the panel, making it easy to adjust the temperature and set timers when needed.
For the dining area, the following products were installed: 1 x Domus 580W panel 1 x Poer 26 WiFi thermostat The Domus 580W panel was mounted next to the window, directly facing the dining table. This placement provided comfortable warmth during meals and helped create a more pleasant dining space. A separate thermostat was fitted for this area, allowing independent control from the living area.
For the hall and stair area, the following products were installed: 1 x Domus 580W panel 1 x Poer 26 WiFi thermostat The panel was installed on the main wall, facing the stairs. This helped provide warmth to both the hallway and the stairwell leading to the upper floor. Like the other panels, it was connected to its own Poer 26 WiFi thermostat for precise temperature control.
The installation was carried out by a local professional electrician recommended by the Royal Infrared Heating® team. The electrician ensured each panel was positioned correctly and wired neatly to its dedicated thermostat for safe, convenient and efficient use.
The new infrared heating system transformed the townhouse into a much warmer and more comfortable permanent home. Each Domus panel provides targeted, consistent warmth in its own area, while the Poer 26 WiFi thermostats give the homeowners simple control over temperature and heating schedules. The result is a cleaner, more efficient and more cost-effective heating setup that solved the homeowners’ heating challenges and made the property better suited for year-round living.
The owners of a townhouse in Spain were struggling to heat their large living area efficiently. The property had poor insulation and older windows, which allowed cold air to enter and made the room difficult to keep warm. Before switching to infrared heating, the homeowners relied mainly on air conditioning, with a portable gas heater used on colder days. However, the air conditioning created dry air, which contributed to health issues and made the indoor environment uncomfortable. They contacted Royal Infrared Heating® to find a healthier and more efficient heating solution for the living area and bedroom.
Property type: Townhouse with large living area Location: Spain Areas heated: Living area 39m², bedroom 13m² Solution: Domus far infrared panel heaters with Avis S smart plug-in thermostats
Royal Infrared Heating® recommended a flexible heating setup using Domus far infrared panel heaters and Avis S smart plug-in thermostats. The system was designed to provide steady, comfortable warmth while reducing reliance on air conditioning and avoiding the dry air associated with AC heating.
For the living area of approximately 39m², the following products were installed: 1 x Domus 900W panel 1 x Domus 580W panel 2 x Avis S smart plug-in thermostats The Domus 900W panel was mounted near the sofa to act as the main heater during the winter months. The Domus 580W panel was installed approximately 30cm above the floor on an exterior wall near the window. This helped reduce the effect of cold draughts and warm the wall itself, improving comfort in the room. Each panel was connected to its own Avis S smart plug-in thermostat, allowing independent temperature control for different areas of the living space.
For the bedroom of approximately 13m², the following was installed: 1 x Domus 580W panel The panel was positioned in front of the bed to provide direct, comfortable warmth during the colder months.
The homeowners installed the infrared heating system themselves using the supplied wall-mounting kit and plug-in setup. The process was straightforward, with no major building work required. The plug-in thermostats made it easy to control each panel separately without complicated wiring.
The new infrared heating system provided efficient, even warmth across the living area and bedroom. By reducing the need for air conditioning, the homeowners avoided the dry air that had previously caused discomfort. The result was a healthier, warmer and more comfortable indoor environment. With independent thermostat control, each area can now be heated only when needed, helping to improve comfort while reducing electricity consumption. The simple installation and strong performance exceeded the homeowners’ expectations.
Jonathan Wallace, a homeowner in Murcia, wanted an energy-efficient heating solution that would warm several areas of his home while still fitting naturally into the interior design. After researching different options, he chose a complete infrared heating setup from Royal Infrared Heating®. The solution included five Domus infrared panels for heating multiple rooms and a Repulsus 500W Mirror Heater for the living area. The aim was to create a home heating system that was efficient, comfortable and visually discreet, without relying on bulky radiators or air conditioning.
Royal Infrared Heating® supplied a tailored setup using: 5 x Domus infrared panels 1 x Repulsus 500W Mirror Heater with LED backlight The Domus panels provided reliable infrared warmth across different rooms, while the Repulsus mirror heater added both heat and style to the living area. The Repulsus 500W was chosen because it works as both a modern mirror and an efficient infrared heater, making it ideal for a space where appearance was just as important as comfort.
In the living area, the Repulsus 500W Mirror Heater was installed vertically near the bookshelves and above a wooden cabinet. This position allowed the mirror heater to provide direct warmth to the room while blending beautifully with the existing furniture and décor. The LED backlight added a stylish finishing touch. When switched on, it created a soft, modern glow in the room. When switched off, the heater kept a clean and minimal mirror appearance.
The heater was installed neatly on the wall, taking up no floor space and avoiding the need for a traditional radiator. Its slim mirror design made it a practical and decorative part of the room, rather than something that looked like a heating appliance. The Domus panels were used throughout the property to create a complete infrared heating system for everyday comfort.
Jonathan was very pleased with the performance and appearance of the new heating setup. The Repulsus 500W Mirror Heater provided targeted warmth in the living area, making the space feel cosy and inviting during colder months. The LED backlight also improved the atmosphere of the room, giving the installation a premium look. The combination of Domus panels and the Repulsus mirror heater showed how infrared heating can be both practical and stylish. Jonathan’s home now benefits from efficient warmth across multiple rooms, while the mirror heater adds an elegant design feature to the living space.
This project is a strong example of how modern infrared heating can be integrated into a home without compromising on interior style. For Jonathan, the Repulsus 500W was more than just a heater. It became a functional design feature, offering warmth, elegance and everyday efficiency in one product.
Jeroen van Dijk, a Dutch professional living in Barcelona, wanted an efficient heating solution that would suit the clean, modern style of his apartment. After installing two Velit Sol heaters in the living room, he wanted something more discreet for the bedroom. The aim was to add comfortable warmth without affecting the minimalist look of the space. The Repulsus 500W Infrared Mirror Heater was the ideal choice, combining everyday heating with a stylish mirror design.
Royal Infrared Heating® supplied a setup that included: 2 x Velit Sol heaters for the living room 1 x Repulsus 500W Mirror Heater for the bedroom The Velit Sol heaters provided strong, efficient warmth in the main living area, while the Repulsus mirror heater offered a more space-saving and decorative solution for the bedroom.
The Repulsus 500W Mirror Heater was installed vertically on the bedroom wall, next to a wooden bookshelf. This placement helped the mirror blend naturally into the room while still providing direct and effective infrared warmth. The built-in LED backlight added a soft, modern glow in the evenings, helping create a calm and cosy bedroom atmosphere.
The mirror heater was plugged into a nearby socket, making the installation quick and straightforward. With its touch control, Jeroen could easily switch the heater and LED light on or off, making the product simple and practical for daily use.
Jeroen was very pleased with how quickly the Repulsus mirror heater warmed the bedroom. He especially liked the combination of fast heating, soft LED lighting and modern design. The heater did not take up extra space and looked like a natural part of the interior rather than a traditional heating appliance. Together with the Velit Sol heaters in the living room, the Repulsus 500W helped turn the apartment into a warmer, more comfortable and energy-efficient home.
This Barcelona project shows how infrared heating can work beautifully in modern city apartments. The Velit Sol heaters delivered powerful comfort in the living area, while the Repulsus 500W mirror heater provided a stylish, space-saving and practical heating solution for the bedroom.
Alejandro Martínez wanted to make his bathroom warmer and more comfortable, especially on chilly mornings and during the winter months. His previous bathroom heating was slow and inefficient, so he began looking for a cleaner and more practical solution. He wanted something that could warm the room quickly while also adding everyday convenience. The Linteum 580W Far Infrared Towel Rail Heater was the ideal choice, offering efficient infrared warmth while also helping keep towels warm, dry and ready to use.
Royal Infrared Heating® recommended a bathroom heating setup using: 1 x Linteum 580W Far Infrared Towel Rail Heater 1 x Poer 26 WiFi Thermostat The Linteum 580W provided direct infrared warmth for the bathroom, while the towel rail function added comfort and practicality to Alejandro’s daily routine. To give full control over temperature and timing, the heater was paired with a Poer 26 WiFi Thermostat.
The Linteum 580W was mounted vertically on the bathroom wall, saving space and fitting neatly into the room. Its slim, clean design suited the modern bathroom style, while the towel rail made the heater useful every day, not only during the colder months. The Poer 26 Thermostat was installed near the light switch for easy manual control. It also allowed Alejandro to control the heating remotely through the app and set heating schedules around his routine.
The new setup made the bathroom much more comfortable. Alejandro noticed that the room warmed up faster than with his previous heating, and the towels stayed warm and dry after use. The smart thermostat also helped improve efficiency by heating the bathroom only when needed. With custom schedules, the bathroom could be warm in the morning and automatically switch off when not in use.
The combination of the Linteum 580W and Poer 26 WiFi Thermostat gave Alejandro a stylish, efficient and practical bathroom heating solution. This project shows how far infrared heating can bring both comfort and luxury into a modern bathroom, while helping reduce wasted energy through smart control.
Alejandro Martínez wanted to improve the comfort of his bathroom in Valencia, especially during chilly mornings and the colder winter months. His previous bathroom heating was slow to warm the space and not very efficient. He wanted a modern solution that could heat the room quickly, keep towels warm and dry, and still look clean in a contemporary bathroom. The Linteum 580W Far Infrared Towel Rail Heater was chosen as the ideal solution, combining comfortable infrared warmth with the practical benefit of a towel rail.
Royal Infrared Heating® recommended a simple and efficient bathroom setup using: 1 x Linteum 580W Far Infrared Towel Rail Heater 1 x Poer 26 WiFi Thermostat The Linteum 580W provided direct warmth for the bathroom while also keeping towels dry and comfortable after use. The Poer 26 WiFi Thermostat gave Alejandro full control over temperature, schedules and daily heating times.
The Linteum 580W was mounted vertically on the bathroom wall, keeping the installation neat and space-saving. Its slim design fitted naturally into the bathroom without making the room feel crowded. The towel rail function also made it practical for everyday use. The Poer 26 Thermostat was installed near the light switch, making it easy to adjust manually. With WiFi control, Alejandro could also manage the heating from his smartphone and set automatic schedules.
The new heating setup made the bathroom much more comfortable and efficient. Alejandro noticed that the room warmed up faster than before, and the towels stayed warm and dry. The thermostat scheduling helped reduce unnecessary energy use by heating the bathroom only when needed. The bathroom could now be warm in the morning, ready before use, and automatically switched off afterwards.
The Linteum 580W and Poer 26 WiFi Thermostat created a stylish, practical and energy-efficient bathroom heating solution in Valencia. This case shows how infrared towel rail heating can add comfort, function and a touch of luxury to a modern bathroom.
James Thornton, a British homeowner living in Valencia, wanted to create a private wellness space at home. With a busy lifestyle and a strong interest in health and recovery, he was looking for a sauna that could offer daily relaxation, gentle infrared warmth and a premium home spa experience.
After researching different options, James chose the Balnera S2 by Royal Infrared Heating®. The combination of Canadian Hemlock wood, low-EMF infrared technology, carbon heating panels and elegant design made it a strong match for his home wellness project.
The Balnera S2 was selected as a compact but comfortable infrared sauna for regular personal use. Its far infrared heating panels provide deep, even warmth, while the natural Canadian Hemlock finish creates a calm and high-quality interior feel.
The sauna also includes simple digital controls, soft LED lighting and an ergonomic bench layout, helping James enjoy a comfortable and relaxing experience without needing a traditional steam sauna setup.
James reserved his Balnera S2 in winter 2025 and received delivery in summer 2025. The sauna arrived securely packaged and was delivered directly to his home in Valencia.
Installation was simple and straightforward. The Balnera S2 arrived in pre-assembled panels, allowing the sauna to be put together in around 30–40 minutes without complex building work. The panels fitted neatly together, creating a clean and professional result inside the home.
Since installation, James has made the sauna part of his weekly wellness routine. He uses it four to five times per week, mainly in the evenings after work to relax, unwind and support muscle recovery.
The easy-to-use control system allows him to adjust the temperature and session duration quickly. The soft lighting, warm wood finish and comfortable seating make each session feel like a private spa experience at home.
Before purchasing, James was interested in energy use and long-term running costs. After several months of use, he found the Balnera S2 to be efficient in daily operation, with only a small impact on his electricity bill.
The carbon infrared panels heat up quickly and maintain a consistent temperature, while the Canadian Hemlock construction helps retain warmth inside the sauna. The low-EMF design also gave James extra confidence for regular long-term use.
The Balnera S2 has transformed part of James’s Valencia home into a personal wellness retreat. It gives him a dedicated space for relaxation, recovery and quiet time without needing to leave the house.
For James, the sauna has become one of the most valued additions to his home, combining comfort, wellness, efficiency and premium design in one compact indoor solution.
“From the smooth ordering process to the easy assembly and the incredible infrared heating experience, the Balnera S2 has exceeded my expectations. It is now my favourite place to relax and unwind at home, and I could not be happier with my choice.”
This Marbella home was designed around comfort, sunlight and relaxed Mediterranean living. The client wanted to create a private wellness corner inside the home, close to the terrace and with easy access after swimming, showering or evening relaxation.
The Balnera S2 was selected for its compact footprint, elegant Canadian Hemlock finish and advanced infrared heating technology. Placed beside the terrace doors, it blends naturally into the warm interior while offering a private spa experience without taking over the space.
The Balnera S2 was the ideal choice for this setting. Its natural wood design, tempered glass and clean structure work beautifully with the soft tones of the home, while the infrared heating system provides gentle, deep warmth for daily relaxation.
The sauna creates a calm wellness area that feels connected to the home’s lifestyle: bright, peaceful and easy to enjoy throughout the year.
The sauna was delivered securely packaged and assembled inside the property using its practical panel-based structure. No complex construction was required, making the process simple and efficient.
Once installed, the Balnera S2 became a convenient part of the client’s routine. Its position near the terrace and bathroom makes it easy to enjoy after swimming, before resting or as part of an evening wellness ritual.
The Balnera S2 adds both function and atmosphere to the space. The Canadian Hemlock wood brings warmth and elegance, while the glass front keeps the sauna visually light and refined.
Inside, the infrared heat creates a soothing experience that feels comfortable, calm and easy to enjoy. The result is a private wellness retreat that complements the home rather than feeling separate from it.
This installation transformed an unused indoor corner into a refined wellness feature. The Balnera S2 now offers the client a private space to relax, recharge and enjoy infrared warmth at home, while adding a premium spa-like touch to the property.
“The Balnera S2 fits perfectly into our home. It feels elegant, warm and easy to use. We wanted a private wellness space that would not disturb the design of the house, and this sauna became exactly that.”
This installation was completed inside a Mediterranean home in La Manga, Murcia. The sauna was placed in a bright living area beside a natural stone wall, with large glass doors opening towards the terrace.
To the left of the sauna entrance, the doors lead directly out to the terrace and open swimming pool area. This made the position especially practical, allowing the sauna to become part of the home’s normal daily routine after swimming, relaxing outside or spending time in the sun.
The Balnera S3 was chosen because it offered the right balance of comfort, size and appearance for the space. The natural Canadian Hemlock finish works well with the stone wall, neutral interior colours and warm Mediterranean light.
The sauna does not feel separate from the room. It sits naturally within the interior, beside the terrace access, creating a calm wellness corner that is easy to use without changing the character of the home.
The Balnera S3 was reserved in Autumn 2025 and delivered in late Winter 2026. After delivery, the sauna was assembled indoors in the selected position against the stone wall.
For this project, the homeowner arranged for local electricians to professionally hardwire the sauna into the property’s central smart home system. This allowed the cable to be hidden and gave the installation a cleaner, more integrated finish.
The location of the sauna makes it very convenient for regular use. It is positioned close to the terrace, the pool area and the main living space, so it can be used after swimming, during cooler evenings or as part of a quiet wellness routine at home.
The glass front keeps the sauna feeling open and visually light, while the wood interior creates a warmer and more private atmosphere once inside.
The room already had a relaxed Mediterranean feeling, with natural light, stone texture, plants and soft interior tones. The Balnera S3 added a wellness function to the space without making it feel too technical or intrusive.
The result is a simple and practical sauna installation that feels connected to the way the home is actually used.
This La Manga installation turned part of the living area into a comfortable indoor wellness space. The sauna is easy to access from the terrace and swimming pool area, while the smart home connection gives the final installation a clean and professional finish.
The final result is a practical home sauna setup that combines Finnish sauna culture, Mediterranean living and modern smart home convenience.
This project was created for a family from Lithuania with a home in Alicante. They wanted an infrared sauna that would fit their available space, offer a private and comfortable interior, and feel natural within the warm Mediterranean setting of the property.
Instead of choosing a standard model, the family requested a customised Balnera S design with adjusted dimensions and a more enclosed structure. The goal was to keep the elegance of the glass entrance while replacing the side glass walls with wood for greater privacy during use.
The Balnera S Custom was produced with a special size based on the client’s requirements. The sauna was designed with a glass door at the front, while the surrounding glass wall sections were replaced with wood panels to create a more private and enclosed feeling.
This gave the sauna a calmer and more traditional interior atmosphere while still keeping a clean, modern look from the front. The natural Canadian Hemlock finish also helped the sauna blend beautifully with the soft tones of the room and the coastal views outside.
The main custom request was privacy. The family wanted to enjoy the benefits of an infrared sauna without feeling too exposed inside the space.
To achieve this, the Balnera S Custom was built with wooden side walls instead of glass side panels. This made the sauna feel more personal and sheltered while maintaining a bright entrance through the glass door.
The final design offered the balance the family wanted: privacy inside, elegance outside and a sauna size made specifically for their home.
The sauna was reserved in Winter 2024 and delivered in Spring 2025. After delivery, it was positioned inside the home near large windows with open views towards the coast.
The setup created a peaceful indoor wellness corner that can be used throughout the year. The sauna is close to towels, relaxation space and natural light, making it easy to include in the family’s regular routine.
The wooden side panels give the sauna a more private and quiet feeling during use. Inside, the Canadian Hemlock wood creates warmth and comfort, while the glass door keeps the entrance visually light.
The result is a sauna that feels personal, practical and calm, with a strong sense of privacy and comfort. The surrounding sunlight and sea view add to the relaxed Mediterranean atmosphere.
This Alicante project shows how the Balnera S can be adapted to specific space and privacy needs. By customising the size and replacing the glass wall sections with wood, the family received a sauna that matched both their home and their personal preferences.
The final installation combines Baltic wellness habits with Mediterranean living, creating a private infrared sauna experience designed specifically for the way the family wanted to use it.
INNOVATIVE SOLUTIONS
Efficient, durable and designed for modern living
WIDE PRODUCT RANGE
Infrared heaters and saunas for every space
PERSONALISED SERVICE
Expert advice before and after your purchase
FAST, SECURE DELIVERY
Carefully handled delivery across Europe
Based in Spain
Local stock & support from our Spanish warehouses
Warranty Included
Reliable cover for complete peace of mind
ESTABLISHED SINCE 2010
Trusted infrared expertise built over many years
EUROPE-WIDE SERVICE
Supporting homes and businesses across Europe
Have a question? We’re here to help.
Send us a message and get personalised recommendations from our team
