Mounting brackets

There is no need to pre-install any parts. The mounting brackets are attached to the device and allow you easily fit the heater to a wall with a help of only 4 screws.

Heater position recommendation

Our recommendation is to mount the heater in the middle or bottom part of any wall for the best heating efficiency.

In terms of positioning of the heater in the heated room/area, the best is to mount it as close as possible to the area where you or your guests spend most of the time.

Indeed, overtime the infrared waves will reach all surfaces providing an even temperature, but you will still feel more heat close to the heater.

Thus, you may want to mount the heater in the middle of the heated room/area to help spreading the heat as even as possible. 

However, if you have a limited number of wall parts to mount the heater, always feel free to mount the heater to any available  part. It will not simnifically change the efficiency of the IR heating.

Power source

Plug it in

If you want simply plug the heater in a socket, please make sure the socket is located nearby or you use a proper quality socket-extension. By default the electrical cord length is 1.9m. You can cut it and extend if needed.

Or hardwire it

If you want to hard-wire the heater, you can use any closest electrical outlet/box or even any socket or light switcher to get to the electrical line. You can easily cut the electrical cord and extent it as much as needed.