Not just a heater, but the experience…
The Domus 580 Watts heater by Royal Infrared Heating uses 0.58 kW of power. With an average daily use of 4 to 6 hours and an electricity price of 0.20 euros per kWh, the monthly cost to heat a room up to 14m² to a comfortable temperature of 22 degrees would be approximately between 10 and 21 euros.
0.58 kW×4 hours×30 days×0.20 euros/kWh
0.58 kW×6 hours×30 days×0.20 euros/kW
*provided heaters are used wisely and efficiently
INNOVATIVE SOLUTIONS
Efficient, durable and designed for modern living
WIDE PRODUCT RANGE
Infrared heaters and saunas for every space
PERSONALISED SERVICE
Expert advice before and after your purchase
FAST, SECURE DELIVERY
Carefully handled delivery across Europe
Based in Spain
Local stock & support from our Spanish warehouses
Warranty Included
Reliable cover for complete peace of mind
ESTABLISHED SINCE 2010
Trusted infrared expertise built over many years
EUROPE-WIDE SERVICE
Supporting homes and businesses across Europe
Elegant wall-mounted warmth that blends into modern interiors and keeps every room comfortably inviting
At the heart of every Domus panel is a premium carbon heating element, designed to spread far-infrared warmth evenly across the panel’s surface.
Unlike basic NiCr heating cables, the carbon element provides broader, more consistent heat distribution with fewer concentrated hot spots. It is designed for dependable performance, efficient everyday heating and long-term reliability.
Many infrared heaters may look similar from the outside, but their internal heating technology can significantly affect heat distribution, comfort and long-term performance.
At the heart of every Domus panel is a premium carbon heating element designed to distribute warmth evenly across the panel’s surface.
Basic cable-based heaters use narrow resistive wires arranged inside the unit. Heat is generated mainly along these individual cable paths, potentially creating more concentrated heating zones.
The Domus uses a broad carbon heating element that covers a larger surface area. This helps the entire panel warm more consistently and radiate gentle, balanced heat into the room.
Once heated, the panel emits far-infrared energy that is absorbed by people, walls, floors and furniture. These surfaces retain some of the thermal energy and gradually release it back into the room.
Because the system does not depend on a fan, it operates silently and without continuously circulating air and dust.
A broad carbon heating element supports:
– More consistent surface temperatures
– Fewer concentrated heating zones
– Smooth, steady radiant warmth
– Quiet operation with no moving parts
– A slim, modern panel design
– Reliable performance for everyday heating
The heating element is fully enclosed inside the panel, protected by its rigid outer construction.
At only 2.5 cm deep, the Domus combines premium internal heating technology with a discreet, frameless design.
The result is an infrared heater engineered to provide broad, comfortable warmth without bulky equipment, visible heating cables, fans or regular maintenance.
The real difference is not simply how the panel looks on the wall – it is the technology working inside it.
Efficiency
Fast, instant warmth
Savings
Reduced energy costs
Health
Supports drier rooms
Controls
Manual, smart controls
Materials
Durable construction
Installation
Simple wall mounting
0 Maintenance
Zero upkeep required
Warranty
Five-year protection
Efficient far-infrared warmth in one slim, modern panel
Domus delivers comfortable far-infrared heating in a slim 2.5 cm wall-mounted panel. Choose 580W at 100 × 60 cm or 900W at 120 × 75 cm.
Its broad carbon heating element distributes gentle warmth evenly across the panel, heating people and surrounding surfaces without fans, noise or continuous air circulation.
The 580W and 900W models consume 0.58 kWh and 0.90 kWh per full operating hour. A compatible thermostat can reduce unnecessary running time.
By warming walls and surrounding surfaces, Domus can help reduce cold spots, condensation and damp conditionswhen combined with suitable ventilation and building maintenance.
The Domus 580W by Royal Infrared Heating® is a slim, modern far infrared panel heater designed to provide comfortable and efficient warmth for everyday indoor spaces.
With 580 watts of power and a panel size of 100 x 60 x 2.5 cm, the Domus 580W is suitable for rooms up to 13m², depending on insulation, ceiling height, room layout and installation conditions. Its clean white finish and slim 2.5 cm profile allow it to fit neatly into homes, offices, bedrooms, garden rooms, hallways and other modern interiors.
Instead of only heating the air, the Domus panel uses far infrared technology to warm people, walls, floors, furniture and surrounding surfaces directly. This creates a more natural and even feeling of warmth, helping the room stay comfortable without strong air movement or unnecessary dust circulation.
The panel can be installed vertically or horizontally on the wall, giving you flexibility when choosing the best position for your space. An installation kit is included, and the heater is supplied with a 2 metre EU plug cable for simple plug-in use.
For improved comfort and energy control, the Domus 580W can also be used with compatible plug-in thermostats, hardwired thermostats or smart control options.
Built with quality materials and advanced heating technology, the Domus 580W is a practical choice for customers who want a clean design, reliable performance and a simple way to heat their space efficiently.
The Domus 580W uses far infrared heating to create a gentle and comfortable warmth that feels similar to natural sunlight, without producing UV rays.
Instead of blowing hot air around the room, the panel warms people, walls, floors, furniture and surrounding surfaces directly. This creates a softer and more natural feeling of heat, making the room feel comfortable without the heavy or stuffy feeling often caused by traditional heaters.
Traditional convection heaters mainly heat the air first. Warm air rises quickly, which can lead to uneven temperatures, cold spots and wasted energy.
Far infrared heating works differently. It transfers warmth directly to the surfaces and objects in the room. Once these surfaces absorb the heat, they slowly release it back into the space, helping the room stay warm and comfortable for longer.
This creates a more balanced indoor temperature and helps reduce the need for the heater to work constantly.
Because the Domus panel does not rely on strong air circulation, it creates a calmer and more comfortable indoor environment.
With less air movement, there is also less dust being pushed around the room. This can make infrared heating a practical choice for bedrooms, offices, living areas and other spaces where comfort and clean air movement are important.
Far infrared heating also does not dry the air in the same way as many fan or convection-based heaters, helping the room feel more pleasant during regular use.
Inside the Domus panel, Royal Infrared Heating® uses premium carbon heating technology to support even heat distribution and reliable performance.
Many infrared panels may look similar from the outside, but the internal heating material makes a major difference to the quality of warmth, efficiency and long-term durability.
The carbon heating element inside the Domus panel helps spread warmth evenly across the surface of the heater. This allows the panel to provide steady, consistent heat rather than aggressive or uneven warmth.
The quality of an infrared heater is not only about how it looks on the wall. The most important difference is often inside the panel.
By using far infrared heating with a high-quality carbon heating element, the Domus 580W is designed to provide comfortable warmth, dependable operation and efficient everyday performance.
The result is a clean, modern heating solution that feels natural, works quietly and supports a more comfortable indoor environment.
The Domus 580W is designed to provide comfortable warmth while using electricity efficiently. With a power output of 580 watts, the panel uses 0.58 kWh of electricity for every full hour of operation.
Far infrared heating works by warming people, walls, floors, furniture and surrounding surfaces directly. This helps reduce wasted energy because the warmth is delivered where it is needed, rather than only heating the air first.
One of the main advantages of far infrared heating is that the warmth is absorbed by the surfaces in the room. Walls, floors and furniture gradually store heat and then release it back into the space.
This creates a steadier and more lasting feeling of warmth. Instead of the heat disappearing quickly through rising warm air, the room benefits from warmth that remains within the surrounding surfaces.
The running cost of the Domus 580W depends on your electricity tariff and how many hours the panel is used each day.
For example:
0.58 kW x 4 hours per day x 30 days = 69.6 kWh per month
To estimate your monthly cost, multiply 69.6 kWh by your electricity unit rate.
If your electricity rate is €0.20 per kWh:
69.6 kWh x €0.20 = €13.92 per month
This example is based on 4 hours of use per day over 30 days. Your actual cost may be higher or lower depending on your electricity tariff, room size, insulation, outside temperature and daily usage.
| Metric | Calculation | Result |
|---|---|---|
| kWh per month | 0.58⋅4⋅30 | 69.6 kWh |
| Monthly cost (€) | 69.6⋅0.20 | €13.92 |
| Cost per hour (€) | 0.58⋅0.20 | €0.116 |
The Domus 580W is suitable for smaller rooms up to 13m², depending on insulation, ceiling height and layout. For larger spaces, two or more panels can be used together to provide better heat coverage.
Installing panels on different walls can help distribute warmth more evenly across the room. This is especially useful in open-plan areas, larger offices, living spaces, commercial rooms or areas with more than one seating or working zone.
Using multiple panels also allows the heat to be spread more naturally throughout the space, instead of relying on one heating point to warm the whole room.
Traditional heating systems often heat the air first, which can lead to warmth rising to the ceiling or escaping through doors and windows.
Far infrared heating works differently by directing warmth into the room’s surfaces and objects. This helps make better use of the electricity consumed and supports a more efficient heating experience.
When correctly matched to the size and layout of the room, the Domus 580W offers a practical balance between comfort, energy use and running cost.
The Domus infrared panel heater helps create a warmer and drier indoor environment by heating walls, floors, furniture and surrounding surfaces directly.
Damp problems often begin when warm air meets cold surfaces, creating condensation on walls, windows or corners of the room. By gently warming these surfaces, far infrared heating can help reduce cold spots and lower the chance of moisture settling.
Unlike traditional convection heaters, which mainly warm the air, infrared heating works by transferring warmth directly into the surfaces of the room.
As walls and objects absorb the heat, they become warmer and less likely to attract condensation. This can be especially helpful in rooms that often feel cold, damp or difficult to keep comfortable, such as bedrooms, offices, garden rooms, bathrooms, utility areas and older properties.
Mould is more likely to develop in areas where moisture is present for long periods, especially on cold walls or poorly ventilated surfaces.
By helping to keep walls and surfaces warmer, the Domus panel can support a drier environment and reduce the conditions that allow mould to grow. This makes infrared heating a practical choice for customers who want both comfortable warmth and better control of moisture in their space.
A damp room can feel colder, less comfortable and less pleasant to use. Far infrared heating helps create a more stable feeling of warmth by heating the room’s surfaces rather than only the air.
This can make the space feel more comfortable while also helping to reduce the heavy, damp feeling often found in cold rooms.
Infrared heating can help reduce condensation and damp conditions, but it should be used alongside proper ventilation and good building maintenance.
If a room has water leaks, poor insulation or serious structural damp, those issues should be repaired. The Domus panel can support a warmer and drier environment, but it should not be seen as a replacement for fixing the cause of moisture problems.
Domus includes a complete wall-mounting kit and 1.9-metre EU power cable, allowing straightforward plug-in installation without complex electrical work.
For manual use without a thermostat, operate Domus using the on/off switch on the rear junction box. For automatic temperature control, schedules or Wi-Fi features, connect a compatible plug-in or hardwired thermostat.
Install the slim panel vertically or horizontally to suit your room, save floor space and direct infrared warmth towards the areas used most.
Premium materials and carbon heating technology provide reliable everyday warmth with no fan, open flame, moving parts or regular maintenance.
The Domus 580W is designed to be easy to install and simple to use. Once the panel is securely mounted on the wall, it can be connected directly to a standard power socket using the supplied 1.9 metre power cable.
This makes it a practical heating option for customers who want a straightforward solution without major electrical work.
The Domus panel does not require pipes, boilers, radiators or a full central heating system. It works as an independent electric heating panel, making it suitable for single rooms, home offices, bedrooms, garden rooms, rental spaces and commercial areas.
This is especially useful when you want to add heating to a space without changing the existing heating system in the property.
The panel is supplied with an installation kit to help with wall mounting. Its slim and lightweight design makes the installation process simple and clean when fitted correctly.
The panel should always be securely fixed to a suitable wall surface and installed according to the fitting instructions provided.
After the panel has been fitted safely and connected to power, it is ready to use. The clean wall-mounted design keeps the heater neatly positioned and helps save floor space.
This makes the Domus 580W a convenient choice for rooms where you want efficient warmth without bulky heaters, visible radiators or complicated installation work.
For customers who prefer a cleaner and more permanent finish, the Domus panel can also be hardwired by a qualified electrician.
This option is ideal when you want the cable hidden, the panel integrated into the room more neatly, or several panels installed as part of a larger heating setup.
The Domus panel is designed to work with external thermostat controls, giving you flexibility over how you manage your heating.
Instead of relying on a built-in wireless thermostat inside the heater, the Domus uses a physical connection to a compatible thermostat. This can be done with a plug-in thermostat or through a hardwired mains thermostat.
This setup provides a more stable and dependable way to control the heater, avoiding the common inconvenience of weak wireless connections directly inside the panel.
When connected to a compatible Wi-Fi thermostat, the Domus panel can be controlled from your smartphone. This allows you to adjust the temperature, set heating schedules and manage the panel remotely when you are away from home.
Some smart thermostats also allow you to share access with family members, tenants or colleagues, making it easier to manage heating in homes, offices, rental properties and commercial spaces.
This gives you the benefit of smart heating control while keeping the heater itself simple, reliable and easy to maintain.
A plug-in thermostat is a simple and convenient option for customers who want easy temperature control without professional installation.
The panel plugs into the thermostat, and the thermostat plugs into the wall socket. Depending on the model, plug-in thermostats can be manual, programmable or Wi-Fi enabled.
This is a practical choice for bedrooms, offices, garden rooms, temporary spaces or any room where a quick and flexible setup is preferred.
For a neater and more permanent setup, the Domus panel can also be connected to a hardwired mains thermostat by a qualified electrician.
Hardwired thermostats are ideal when you want to control one panel, several panels in the same room, or separate heating zones throughout a property.
Many hardwired thermostat options also include Wi-Fi control, allowing you to combine a clean cable-free finish with modern smart heating features.
The Domus panel also includes a discreet power switch on the back of the heater. This allows the panel to be switched on or off manually if needed.
The manual switch is useful for basic operation, but it does not provide temperature control. For better comfort, efficiency and day-to-day use, we recommend using the panel with a suitable thermostat.
The Domus panel can be used with a wide range of compatible thermostat options, including Royal Infrared Heating® thermostats, selected third-party plug-in thermostats and suitable hardwired controls.
In some cases, it may also be possible to integrate the panel with existing mains thermostat systems, depending on the property and wiring setup.
This flexibility makes the Domus suitable for simple home use, smart heating upgrades, larger heating projects and professional installations.
The Domus infrared panel heater is designed to be mounted either vertically or horizontally, giving you more freedom when choosing the best position for your room.
This flexibility makes it easier to fit the panel around furniture, windows, doors and available wall space. Whether you want a tall vertical layout or a wider horizontal position, the Domus panel can be installed in the way that best suits your interior.
The slim wall-mounted design helps keep your room clear and uncluttered. Instead of taking up floor space like portable heaters or radiators, the Domus panel sits neatly against the wall with a clean and modern appearance.
This makes it suitable for homes, offices, bedrooms, garden rooms, hallways, commercial rooms and other spaces where both comfort and appearance matter.
The Domus panel is supplied with an installation kit for straightforward wall mounting. The fitting process uses four mounting points to hold the panel securely in place when installed on a suitable wall surface.
Once fixed correctly, the panel remains stable, discreet and ready for everyday use. The installation should always be carried out according to the official mounting instructions.
Because the Domus panel can be positioned in different ways, it works well in both small and larger spaces. In larger rooms, more than one panel can also be installed on different walls to help spread warmth more evenly across the area.
This is especially useful in open-plan spaces, offices, commercial rooms or interiors where one heating point may not provide balanced coverage across the whole room.
For clear fitting instructions, please follow the official Domus Mounting Guide.
Many infrared panel heaters can look similar from the outside, but the real difference is found inside the panel.
The Domus infrared panel heater by Royal Infrared Heating® is built with carefully selected materials and advanced internal heating technology. This helps provide steady warmth, reliable operation and long-term performance for everyday use.
Inside the Domus panel, premium carbon heating technology is used to support even heat distribution across the surface of the heater.
This helps the panel produce a smooth and consistent warmth, rather than uneven heat or isolated hot spots. Even heat distribution is important for comfort, efficiency and the long-term performance of the heater.
The Domus panel is designed to be a durable heating solution, not a short-term replacement product.
Some low-cost infrared heaters use basic internal heating cables that may become less efficient over time. The Domus panel uses a higher-quality heating structure designed to maintain reliable performance during regular use.
This focus on better internal components helps support a longer service life and more dependable heating over time.
The Domus panel is designed for safe wall-mounted use when installed and operated correctly. Its slim, fixed position helps keep the heater neatly placed on the wall, reducing the need for portable heaters, trailing units or bulky radiators.
The panel also provides quiet operation, with no fan, no open flame and no moving heating parts. This makes it a clean and practical heating choice for homes, offices, bedrooms, garden rooms and commercial spaces.
Royal Infrared Heating® focuses on practical design, dependable materials and efficient heating performance.
The Domus panel is made for customers who want more than a heater that simply looks good on the wall. It is designed to provide comfortable warmth, stable operation and long-lasting value.
By choosing Domus, you are choosing a heating panel built with care, designed for daily comfort and made to perform reliably over time.
No Noise. No Smell. Just Warmth.
Living area
Bedroom
Bathroom
Hall/Entrance
Patio/Terrace
Outdoor
The Domus 580W can heat up to 13m² in well-insulated rooms. For larger spaces, open-plan areas or rooms with weaker insulation, using more than one panel helps spread warmth more evenly and improves comfort.
For larger bathrooms, colder spaces or rooms with weaker insulation, using more than one Domus panel can distribute radiant warmth more evenly and improve comfort.
| Room Size | Well Insulated | Typical Insulation | Poorly Insulated |
|---|---|---|---|
| Up to 7m² | 1 × Domus 580W | 1 × Domus 580W | 1 × Domus 580W |
| 8 – 12m² | 1 × Domus 580W | 2 × Domus 580W | 2 × Domus 580W |
| 13 – 18m² | 2 × Domus 580W | 2 × Domus 580W | 3 × Domus 580W |
| 19 – 24m² | 2 × Domus 580W | 3 × Domus 580W | 4 × Domus 580W |
The appropriate number of Domus panels depends on room insulation, ceiling height, window size and quality, room layout, outside temperature, desired room temperature, panel position and the amount of warmth required. Bathrooms or spaces with large windows, exterior walls, high ceilings or limited insulation may need additional heating capacity to reach a comfortable temperature.
For larger bathrooms, dressing areas or commercial washrooms, multiple Domus panels can be installed in different positions to distribute radiant warmth more evenly across the room. Using more than one panel reduces reliance on a single heating point and helps maintain a consistent surface temperature throughout the space.
Install Domus panels so the front surface faces the area where warmth is needed and avoid blocking the panel with large furniture, bathroom units or other objects. Position panels to provide direct radiant coverage of the zones you use most, and keep towels or fabrics from covering the entire heating surface to ensure efficient heat transfer.
Domus panels can be mounted vertically or horizontally to suit the room layout and available wall space. Choose the orientation that best fits around windows, doors and fixtures while ensuring the panel remains accessible for maintenance and thermostat connections.
Each Domus panel is supplied with an installation kit and uses four mounting points for a secure fit on a suitable wall surface. Follow the official mounting instructions and use fixings appropriate for your wall type to ensure a stable, long‑lasting installation.
This guide provides an estimate; actual performance depends on the property and installation conditions. Domus panels are splash‑resistant but not waterproof; bathroom installation must comply with local electrical regulations and approved bathroom zones. For larger rooms or properties with poor insulation, contact Royal Infrared Heating® for a personalised recommendation.
Each Domus 580W panel consumes 0.58 kWh per hour when operating continuously at full power.
When connected to a compatible thermostat, the panel does not normally need to run throughout the entire heating period. Once the selected room temperature is reached, the thermostat switches the panel off and activates it again when additional warmth is required.
Based on an electricity rate of €0.20 per kWh:
| Domus Setup | Price / Month (4 hrs/day) | Price / Month (6 hrs/day) | Price / Month (8 hrs/day) |
|---|---|---|---|
| 1 × Domus 580W | €8.70 – €10.44 | €13.05 – €15.66 | €17.40 – €20.88 |
| 2 × Domus 580W | €17.40 – €20.88 | €26.10 – €31.32 | €34.80 – €41.76 |
| 3 × Domus 580W | €26.10 – €31.32 | €39.15 – €46.98 | €52.20 – €62.64 |
| 4 × Domus 580W | €34.80 – €41.76 | €52.20 – €62.64 | €69.60 – €83.52 |
Far-infrared heating warms people, walls, floors, tiles, furniture and other bathroom surfaces directly.
Once the room reaches the set temperature, the thermostat switches the panel off. Even after switching off, the panel and the warmed surfaces in the room continue to release gentle residual heat for around 30 minutes. The heat becomes softer during this time, but the room can still feel warm and comfortable.
This is one of the advantages of far infrared heating. Walls, floors, furniture and surrounding surfaces absorb the warmth and slowly release it back into the space, helping maintain comfort while reducing active electricity use.
As a practical estimate, if you want around 8 hours of comfortable heating, the panel may only need to actively run for approximately 5–6 hours. Actual use depends on insulation, room layout, thermostat settings, outside temperature and the month of the year.
During colder winter months, the panel may run for longer. During milder months, it may switch off more often and use less electricity.
Based on an electricity rate of €0.20 per kWh:
These figures are estimates based on thermostat-controlled use. Actual consumption may be lower or higher depending on insulation, ceiling height, window quality, room layout, outside temperature, the month of the year and your preferred comfort level.
Using a thermostat helps reduce unnecessary energy use because the Domus panel only runs when heat is needed. Even when the thermostat switches it off, the panel and the room’s warmed surfaces continue releasing softer residual warmth for a period of time, helping the room stay comfortable for longer.
Installing Domus requires four holes to be drilled into a suitable wall. Each unit includes screws, wall plugs, towel-rail fittings and a detailed drilling template. For clear, step-by-step instructions, please follow the Domus Installation Guide.
Domus infrared panels can be operated manually using the discreet rear on/off switch, providing straightforward and reliable everyday heating.
For automatic temperature control, heating schedules or smart app features, connect the panel to a compatible thermostat. Choose a plug-in model for simple setup, a hardwired thermostat for a cleaner finish, or ask a qualified electrician to install another suitable external thermostat. This flexibility allows Domus to work as either a manual heater or part of a fully controlled heating system.
Thermostats are optional with Domus panels. Each panel includes a discreet power switch for simple manual operation. However, if you want automatic temperature control, scheduling, or smart app features, you can connect your panel to a compatible thermostat.
Already have a thermostat or prefer another model? Browse additional options on Amazon.es and choose the solution that works best for your home and budget.
Have a question? We’re here to help.
Send us a message and get personalised recommendations from our team
In early 2024, homeowner Honda Gitas contacted Royal Infrared Heating® for help heating a recently purchased property near Murcia. Poor insulation made the home uncomfortable during colder months and difficult to heat efficiently.
The property previously relied mainly on air conditioning for warmth, resulting in high electricity bills without providing consistent comfort. A more efficient and practical heating solution was needed.
Royal Infrared Heating® recommended a tailored system for the open-plan living area, kitchen, hallway and bedroom.
For the approximately 40m² open-plan area, the following products were installed:
1 × Domus 900W panel
1 × Domus 580W panel
1 × Repulsus 350W mirror heater for the kitchen
The Domus panels provide the main source of warmth, while the Repulsus mirror heater adds targeted heat and a practical mirror feature to the kitchen.
A further Domus 580W panel was installed above the bed to provide direct, comfortable warmth in the bedroom.
The full property setup included:
1 × Domus 900W panel
2 × Domus 580W panels
1 × Repulsus 350W mirror heater
Depending on the room layout, insulation and design preferences, the Domus 900W panel could be replaced with:
2 × Domus 580W panels
or
1 × Domus 580W panel and 1 × Repulsus 350W mirror heater
These alternatives provide greater flexibility for open-plan areas, larger rooms and spaces requiring more evenly distributed heat.
The installation was completed by electricians near Murcia at an approximate cost of €30–€40 per panel. The complete installation took around 2–3 hours.
All panels were mounted neatly in the selected locations, and the process was quick, clean and straightforward.
Following the installation, the property felt warmer and more comfortable. The infrared heating system provided steady, energy-efficient warmth while reducing reliance on air conditioning.
The combination of Domus panels and the Repulsus mirror heater delivered targeted heat where it was needed most while maintaining a clean, modern interior.
Honda now enjoys a warmer and more comfortable home with a heating system that is easier to manage and more cost-effective during winter.
In Rojales, Alicante province, the owners of a two-storey townhouse wanted an efficient and modern heating solution for the main areas of their home. The property required heating across several connected spaces, including the living area, kitchen, stairs and landing. The goal was to create even warmth throughout the home while keeping the installation clean, discreet and easy to control. Royal Infrared Heating® recommended a tailored setup using Domus far infrared panel heaters paired with Poer 26 WiFi thermostats.
The heating system was designed around the layout of the townhouse, with each key area receiving its own infrared panel and smart control. For the living area of approximately 35m², the following products were installed: 2 x Domus 900W panels 2 x Poer 26 WiFi thermostats The two panels were placed in opposite corners to help distribute warmth evenly across the room. For the kitchen of approximately 15m², the following was installed: 1 x Domus 900W panel 1 x Poer 26 WiFi thermostat The panel was mounted between the door and window to provide strong heat coverage in the kitchen area. For the stairs and landing of approximately 13m², the following was installed: 1 x Domus 900W panel 1 x Poer 26 WiFi thermostat This panel was positioned opposite the stairs to help warm both the stairwell and landing.
All wiring was concealed during installation, giving the finished setup a clean and modern appearance. The Domus panels were mounted neatly in each area, while the Poer 26 WiFi thermostats allowed each space to be controlled separately for better comfort and efficiency.
The homeowners now enjoy even, comfortable and energy-efficient warmth across the main areas of their townhouse. The combination of Domus infrared panels and WiFi thermostats makes it simple to manage the temperature in each zone, whether at home or remotely. The result is a clean, cost-effective and practical heating solution that improved comfort throughout the property and exceeded the homeowners’ expectations.
Si quieres, puedo adaptarlo a formato web, SEO, catálogo, ficha técnica o estilo comercial.
This townhouse, with an open-plan living area, had previously been used mainly as a holiday home. After the COVID period, the owners decided to move to Spain permanently and needed a heating system suitable for everyday living. The existing air conditioning system was not ideal for permanent use. It consumed too much electricity and did not provide the comfortable, efficient warmth the homeowners wanted. They contacted Royal Infrared Heating® for a modern, energy-efficient heating solution that could warm the main living areas while giving them easy control in each zone.
Royal Infrared Heating® recommended a tailored setup using 3 Domus far infrared panels, each connected to a mains-powered Poer 26 WiFi thermostat. This allowed the homeowners to control each area separately, set schedules and manage the temperature more efficiently.
For the main living area, the following products were installed: 1 x Domus 900W panel 1 x Poer 26 WiFi thermostat The Domus 900W panel was installed in the centre of the main wall, approximately one metre above the floor. This position helped maximise heat distribution across the living space. The thermostat was installed next to the panel, making it easy to adjust the temperature and set timers when needed.
For the dining area, the following products were installed: 1 x Domus 580W panel 1 x Poer 26 WiFi thermostat The Domus 580W panel was mounted next to the window, directly facing the dining table. This placement provided comfortable warmth during meals and helped create a more pleasant dining space. A separate thermostat was fitted for this area, allowing independent control from the living area.
For the hall and stair area, the following products were installed: 1 x Domus 580W panel 1 x Poer 26 WiFi thermostat The panel was installed on the main wall, facing the stairs. This helped provide warmth to both the hallway and the stairwell leading to the upper floor. Like the other panels, it was connected to its own Poer 26 WiFi thermostat for precise temperature control.
The installation was carried out by a local professional electrician recommended by the Royal Infrared Heating® team. The electrician ensured each panel was positioned correctly and wired neatly to its dedicated thermostat for safe, convenient and efficient use.
The new infrared heating system transformed the townhouse into a much warmer and more comfortable permanent home. Each Domus panel provides targeted, consistent warmth in its own area, while the Poer 26 WiFi thermostats give the homeowners simple control over temperature and heating schedules. The result is a cleaner, more efficient and more cost-effective heating setup that solved the homeowners’ heating challenges and made the property better suited for year-round living.
The owners of a townhouse in Spain were struggling to heat their large living area efficiently. The property had poor insulation and older windows, which allowed cold air to enter and made the room difficult to keep warm. Before switching to infrared heating, the homeowners relied mainly on air conditioning, with a portable gas heater used on colder days. However, the air conditioning created dry air, which contributed to health issues and made the indoor environment uncomfortable. They contacted Royal Infrared Heating® to find a healthier and more efficient heating solution for the living area and bedroom.
Property type: Townhouse with large living area Location: Spain Areas heated: Living area 39m², bedroom 13m² Solution: Domus far infrared panel heaters with Avis S smart plug-in thermostats
Royal Infrared Heating® recommended a flexible heating setup using Domus far infrared panel heaters and Avis S smart plug-in thermostats. The system was designed to provide steady, comfortable warmth while reducing reliance on air conditioning and avoiding the dry air associated with AC heating.
For the living area of approximately 39m², the following products were installed: 1 x Domus 900W panel 1 x Domus 580W panel 2 x Avis S smart plug-in thermostats The Domus 900W panel was mounted near the sofa to act as the main heater during the winter months. The Domus 580W panel was installed approximately 30cm above the floor on an exterior wall near the window. This helped reduce the effect of cold draughts and warm the wall itself, improving comfort in the room. Each panel was connected to its own Avis S smart plug-in thermostat, allowing independent temperature control for different areas of the living space.
For the bedroom of approximately 13m², the following was installed: 1 x Domus 580W panel The panel was positioned in front of the bed to provide direct, comfortable warmth during the colder months.
The homeowners installed the infrared heating system themselves using the supplied wall-mounting kit and plug-in setup. The process was straightforward, with no major building work required. The plug-in thermostats made it easy to control each panel separately without complicated wiring.
The new infrared heating system provided efficient, even warmth across the living area and bedroom. By reducing the need for air conditioning, the homeowners avoided the dry air that had previously caused discomfort. The result was a healthier, warmer and more comfortable indoor environment. With independent thermostat control, each area can now be heated only when needed, helping to improve comfort while reducing electricity consumption. The simple installation and strong performance exceeded the homeowners’ expectations.
The Domus 580W and 900W infrared heating panels are compact and efficient, featuring a slim frame and perfect corners. Easy to mount vertically or horizontally on any wall, its light weight of 9 kg makes installation simple. Ideal for rooms up to 14m², such as bedrooms, living rooms, stairways, and bathrooms, its premium carbon heating element provides immediate and even heat, combining functionality and style.
