Heater Mounting brackets

The mounting brackets are attached to the Domus panel to its back part.

Tripod Stand Mounting Rails

The mounting rails for all heaters of Domus Air model are pre-assembled and are ready to be attached to the panel.

In terms of positioning of the heater in the heated room/area, the best is to keep close to the main area where you spend most of the time.

Indeed, overtime the infrared waves will reach all surfaces providing an even temperature, but you will still feel more heat close to the heater.

Tripod Parts

There are only 4 parts to assemble our Innovative Tripod. No equipment or screwdriver needed.

Power source

Plug it in

If you want simply plug the heater in a socket, please make sure the socket is located nearby or you use a proper quality socket-extension. By default the electrical cord length is 1.9m. You can cut it and extend if needed.

Use this method for a simple on/off usage or with one of our plug-in thermostats.

Thermostat (if you order one)

This Installation Guide does not include details to install and setup our thermostats. Please check the product page to find the right Installation Guide.

Before you choose the place to keep the Domus Air heater, please keep in mind that  in case you want to use the heater with one of our plug-in thermostat, you should position a chosen thermostat not too far from the panel. However, you can always use cord extension in case of lack of sockets in the heated area.

This is important in order to minimise the difference between the real ambient temperature and the one which will be displayed on the thermostat. Thermostat allows you to have manual, app, smart and voice (Alexa, Google Home) controls over the heater.